Edge-Core WA6202AM EU Podręcznik Użytkownika Pobierz pdf (Strona 82)

System Configuration

6-28

• Multiple IP: Specifies an address range as defined by the entered IP address and

subnet mask. For example, IP address 192.168.1.6 and subnet mask

255.255.255.0, defines all IP addresses from 192.168.1.6 to 192.168.1.254.

CLI Commands for AP Management features.

Administration

Changing the Password

Management access to the web and CLI interface on the access point is controlled

through a single user name and password. You can also gain additional access

security by using control filters (see “Filter Control” on page 6-17).

To protect access to the management interface, you need to configure an

Administrator’s user name and password as soon as possible. If the user name and

password are not configured, then anyone having access to the access point may

be able to compromise access point and network security. Once a new Administrator

has been configured, you can delete the default “admin” user name from the system.

Username – The name of the user. The default name is “admin.” (Length: 3-16

characters, case sensitive)

New Password – The password for management access. (Length: 3-16 characters,

case sensitive)

Confirm New Password – Enter the password again for verification.

CLI Commands for the Administrator’s User Name and Password – Use the

username and password commands from the CLI configuration mode.

Enterprise AP(config)#apmgmtip multiple 192.168.1.6 255.255.255.0 7-21

Enterprise AP(config)#apmgmtui SNMP enable 7-22

Enterprise AP(config)#username bob 7-15

Enterprise AP(config)#password admin 7-15

Enterprise AP#

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 331 332

Brak uwag

Edge-Core WA6202AM EU Podręcznik Użytkownika Strona 82