Edge-Core WA6202AM EU Podręcznik Użytkownika Pobierz pdf (Strona 133)

Radio Interface

6-79

• Alphanumeric: Enter keys as 5 alphanumeric characters for 64 bit keys, 13

alphanumeric characters for 128 bit keys, or 16 alphanumeric characters for 152

bit keys (802.11a radio only).

Key Number – Selects the key number to use for encryption for each VAP interface.

If the clients have all four keys configured to the same values, you can change the

encryption key to any of the four settings without having to update the client keys.

(Default: Key 1)

Shared Key Setup – Select 64 Bit, 128 Bit, or 152 Bit key length. Note that the same

size of encryption key must be supported on all wireless clients. (Default: None)

Note: Key index and type must match that configured on the clients.

Note: In a mixed-mode environment with clients using static WEP keys and WPA, select

WEP transmit key index 2, 3, or 4. The access point uses transmit key index 1 for

the generation of dynamic keys.

To enable WEP shared keys for a VAP interface, click Security under Radio A or

Radio G. Then, select the VAP interface that will use WEP keys by clicking More,

and configure the Authentication Type Setup and Encryption fields.

Authentication Type Setup – Sets the access point to communicate as an open

system that accepts network access attempts from any client, or with clients using

pre-configured static shared keys. (Default: Open System)

• Open System: If you don’t set up any other security mechanism on the access

point, the network has no protection and is open to all users. This is the default

setting.

• Shared Key: Sets the access point to use WEP shared keys. If this option is

selected, you must configure at least one key on the access point and all clients.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 331 332

Brak uwag

Edge-Core WA6202AM EU Podręcznik Użytkownika Strona 133